European type fryer solution
Suitable for vertical high flow fryer
Suitable for vertical high flow fryer
Our European type Fryer solution is equipped with Millivolt heating controller, thermostat, over-temperature protector, pilot , thermocouple and thermopile, with precise temperature control, fast heating speed, and safety at the same time. It is a must-have and high-quality accessory for your fryers.
Compliant with European standards
European type fryer solution use AB007-MV micro-current heating controller, AR thermostat, ALCC/ALCH over-temperature protector, pilot , thermocouple and thermopile and other accessories. The safety conforms to European regulations. When pilot fire is accidentally extinguished, the gas will be cut off within the standard specified time.
Precise temperature control
The AR electronic thermostat is designed for instant on/off, maintaining high heat until the set temperature is reached, and then turning off the high heat after the set temperature is reached, keeping only the pilot flame, which ensures precise temperature control and crispy and non-greasy fries.
High flow design for large, medium and small fryers
The AB007-MV heating controller has a maximum flow rate of 300,000 BTUs and is suitable for 2~6 vertical fryers.
The AB007-MV heating controller has a maximum flow rate of 300,000 BTUs and is suitable for 2~6 vertical fryers.
Two protection devices are double safe to use
The AR thermostat is the first protection. When the oil temperature reaches the set temperature, the fire will be extinguished and will not continue to heat. If the AR thermostat function fails, the oil temperature will continue to be heated to the set temperature of the ALCC/ALCH overtemperature protector, and then gas supply will be cut off and the fire will be extinguished to avoid accidents caused by excessive oil temperature caused by continued heating.
The AR thermostat is the first protection. When the oil temperature reaches the set temperature, the fire will be extinguished and will not continue to heat. If the AR thermostat function fails, the oil temperature will continue to be heated to the set temperature of the ALCC/ALCH overtemperature protector, and then gas supply will be cut off and the fire will be extinguished to avoid accidents caused by excessive oil temperature caused by continued heating.
Matching products
You may also be interested in the following
